Astra L4-1.8L (2009)
Shift through all the gears one after the other on the selector lever (2).
3. Connect and lock the selector lever position switch wiring harness plug (2).
*
Disconnect KM-962-A from the battery.
*
Disconnect KM-962-A from the selector lever position switch wiring harness plug.
Note: Ensure it is correctly engaged.
4. Install the selector cable (3).
*
Install the selector cable to the selector lever (4).
*
Connect the selector cable into the counterhold on the transmission.
*
Install the retaining clamp (1).