Astra L4-1.8L (2009)
Variable Valve Timing Actuator: Service and Repair
Camshaft Position Intake Actuator Replacement
Camshaft Position Intake Actuator Replacement
Special Tools
*
MK-6340 Locking Tool
*
KM-6625 Flywheel Locking Device
*
MK-6628 Locking Tool
Removal Procedure
1. Remove the camshaft cover. Refer to Camshaft Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Cylinder Head Assembly/Valve
Cover/Service and Repair).
2. Remove the drive belt. Refer to Drive Belt Replacement (See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and
Accessories/Drive Belt/Service and Repair).
3. Insert MK-6628 (1) into the camshaft.
Turn the camshaft by the hexagon until the groove on the end of the camshafts is horizontal (arrows).
4. Raise the vehicle by its full height.
5. Remove KM-6625 .
Detach the screwed connection.