Astra L4-1.8L (2009)
5. Remove the intermediate fuel pipe or the center vent line.
*
Remove the line from the 4 brackets (3).
*
Disconnect the 2 quick-release fittings (1 or 2) using SA9805E /KM-796-A.
*
Seal the line with KM-807 .
Installation Procedure
1. Install the intermediate fuel pipe.
*
Install the 2 quick-release fittings.
*
Install the line into the 4 brackets.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the 4 line brackets to the vehicle underbody.
Tighten the 4 bolts to 2.5 Nm (22 lb in).
3. Lower the vehicle.
4. Connect the battery.
Install the ground cable.
5. For programming procedures, refer to Control Module References (See: Testing and Inspection/Programming and Relearning).
