saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Control Module, A/T|Diagrams|Page 5314 > < Control Module, A/T|Diagrams|Page 5312
Page 1
background image

Control Module: Service and Repair

Transmission Control Module Replacement

Removal Procedure

1. Remove the center console. Refer to Front Floor Console Replacement   (See: Body and Frame/Interior Moulding / Trim/Console/Service and

Repair).

2. Remove the vent duct (1).

Important:  Do not damage the wiring harness.

3. Open the cable ties (1).
4. Remove the cable ties (2) from the bracket.
5. Disconnect the wiring harness plug (3).
6. Detach the wiring harness plug (4) from the transmission control module (TCM).

Release the wiring harness plug and disconnect.

Control Module, A/T|Diagrams|Page 5314 > < Control Module, A/T|Diagrams|Page 5312