saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Inflatable Restraint Front End Sensor Replacement|Page 10348 > < Inflatable Restraint Front End Sensor Replacement|Page 10346
Page 3
background image

Tighten the bolt to 2.5 Nm (22 lb in).

3. Connect the battery.

Tighten the bolt to 5 Nm (44 lb in).

4. Perform the readiness inspection.
5. For programming procedures, refer to Control Module References   (See: Testing and Inspection/Programming and Relearning).

Inflatable Restraint Front End Sensor Replacement|Page 10348 > < Inflatable Restraint Front End Sensor Replacement|Page 10346