Astra L4-1.8L (2009)
Camshaft Position Sensor: All Technical Service Bulletins
Engine - Lack of Power with Multiple DTCs or Rattle
TECHNICAL
Bulletin No.: 10-06-04-016
Date: December 20, 2010
Subject: Engine Lack of Power with DTCs P0011, P0014, P000A, P000B, P0012, P0015 or Engine Rattle Noise (Remove Oil Filters from Intake and
Exhaust Camshaft Position Actuator Solenoid Valves)
Models:
2008-2011 Chevrolet Aveo
2011 Chevrolet Cruze (US and Canada)
2009-2011 Chevrolet Cruze (Export Only)
2008-2009 Pontiac G3, Wave
2008-2009 Saturn Astra
Condition
Some customers may comment on lack of power with the following DTCs or an engine rattle noise from the sprockets.
Cruze GEN3 1.6/1.8D
-
P0011: Intake Camshaft Position (CMP) System Performance
-
P0014: Exhaust Camshaft Position (CMP) System Performance
-
P000A: Intake Camshaft Position System Slow Response
-
P000B: Exhaust Camshaft Position System Slow Response
Aveo GEN3 1.4D
-
P0012: Intake Camshaft Position (CMP) System Performance Bank 1-Retarded
-
P0015: Exhaust Camshaft Position (CMP) System Performance Bank 1-Retarded
Aveo/G3/Wave Gen3 1.6D
-
P0011: Intake Camshaft Position (CMP) System Performance Bank 1
-
P0014: Exhaust Camshaft Position (CMP) System Performance Bank 1
Correction
Remove four oil filters from the intake and exhaust camshaft position actuator solenoid valves.
1. Open the hood.
2. Disconnect the negative battery cable.
3. Disconnect the camshaft position actuator solenoid valve connectors.
4. Remove the power steering line bracket bolt and reposition the bracket (for 1.6/1.8L only).
5. Disconnect PCV pipe and reposition (for 1.6/1.8L only).
