saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Procedures|Page 1014 > < Procedures|Page 1012
Page 2
background image

2. Remove the lock cylinder.

*

Ignition key to position I.

*

Remove the lock cylinder with a suitable tool (screwdriver) (1).

*

Remove the lock cylinder (arrow).

Installation Procedure

1. Install the lock cylinder.

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

2. Install the lower steering column paneling.

Tighten the 5 screws to 1 Nm (9 lb in).

3. Install the 2 panels.

Procedures|Page 1014 > < Procedures|Page 1012