Astra L4-1.8L (2009)
8. Install the coded lock cylinder (2) into the lock cylinder sleeve (3).
9. Install the free wheeling coupling (5), aligning the tab with the roller (4) groove.
10. Install the lever (6) such that it engages the free wheeling coupling.
Important: The size of the drift punch used must be a 1/16 inch punch. Any other size will not work. Carefully tap the pin (7) in place
and avoid hitting the pin (7) too hard.
11. Using a 1/16 inch drift punch, install the roll pin (7) into the lever (6), tapping lightly with a small hammer to push the roll pin into place until it is
flush with the lever.