saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Procedures|Page 7915 > < Procedures|Page 7913
Page 11
background image

Note:  Connect the battery. Switch ignition on and off. Open and close driver door. The steering lock and ignition lock engage automatically.

6. Install the steering wheel to the steering spindle.

Note:  Ensure the markings (2) on the steering wheel align with those on the steering spindle.

Note:  Guide the airbag wiring harness (1) through the opening in the steering wheel hub.

*

Place the steering wheel on the steering column.

Note:  Clean the thread and install the new bolt using locking compound.

*

Tighten the new bolt.

Tighten the bolt to 30 Nm (22 lb ft).

7. Connect the wiring harness plug for the horn.

Procedures|Page 7915 > < Procedures|Page 7913