Astra L4-1.8L (2009)
Clutch Release Bearing: Service and Repair
Release Bearing Replacement
Release Bearing Replacement
Special Tools
KM-6157 Assembly Sleeves
Removal Procedure
Note: Central release and release bearing are one part. Overhauling is not required. If damaged or leaky, replace entire central release.
1. Remove the transmission. Refer to Transmission Replacement (Engine and Transmission) (See: Manual Transmission/Transaxle/Service and
Repair/Removal and Replacement/Transmission Replacement (Engine and Transmission))Transmission Replacement (Transmission Only) (See:
Manual Transmission/Transaxle/Service and Repair/Removal and Replacement/Transmission Replacement (Transmission Only)).
2. Remove the pressure line (1).
Remove the union nut.
3. Remove the central release.
Remove the 3 bolts (arrow).
