Astra L4-1.8L (2009)
Pressure Plate: Service and Repair
Clutch, Pressure Plate, and Pilot Bearing Replacement
Special Tools
KM-6263 Remover/Installer
Removal Procedure
Note:
*
To prevent damage to the spring fangs of the thrust plate use KM-6263 to remove and install the thrust plate.
*
Note the different lengths of the brackets for attaching KM-6263 to the lower engine block.
*
Thrust plate and clutch disc for vehicles with self-adjusting clutch (SAC) are only available in aftersales as a set.
1. Remove the transmission. Refer to Transmission Replacement (Engine and Transmission) (See: Manual Transmission/Transaxle/Service and
Repair/Removal and Replacement/Transmission Replacement (Engine and Transmission))Transmission Replacement (Transmission Only) (See:
Manual Transmission/Transaxle/Service and Repair/Removal and Replacement/Transmission Replacement (Transmission Only)).
Note: KM-6263 may only be attached to the engine block and not to the oil pan.
2. Attach KM-6263 (1) to the engine block.
