Astra L4-1.8L (2009)
Note: Do not change position of selector lever link.
5. Install the selector lever link.
Tighten bolt (1) to 12 Nm (106 lb in) plus 180-225 degrees.
6. Release the transmission control lever lock.
Detach KM-527-A (1)
Note: The locking pin in the adjusting bore hole releases automatically when first shifted in R direction. If necessary, release the locking pin by
hand.
7. Release the locking pin in the transmission cover.
8. Inspect the ease of gear shifting.
*
With vehicle standing
*
With engine running
