Aura L4-2.4L (2008)
Firewall: Service and Repair
Plenum Upper Panel Replacement
Removal Procedure
Caution: Refer to Approved Equipment for Collision Repair Caution (See: Service Precautions/Technician Safety Information/Approved
Equipment for Collision Repair Caution).
1. Disable the SIR system. Refer to SIR Disabling and Enabling (See: Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming
and Disarming/Service and Repair).
2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (LAT) ()Battery Negative Cable
Disconnection and Connection (LZ4/LY7) ().
3. Remove all related panels and components.
4. Repair as much of the damage as possible. Refer to Dimensions - Body ().
5. Remove the sealers and anti-corrosion materials from the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair ().
Important: Note the number and location of the factory welds for installation of the upper plenum panel.
6. Locate and drill out all the necessary factory welds.
