Aura L4-2.4L (2008)
Sun Shade: Service and Repair
Sunroof Sunshade Stop Replacement
Sunroof Sunshade Stop Replacement
Removal Procedure
1. It is only necessary to lower the headliner. Only do those step in headliner replacement that will lower the headliner enough to gain access to the
part. Refer to Headlining Trim Panel Replacement (See: Interior Moulding / Trim/Headliner/Service and Repair).
2. Pull the sunshade stop from the sunroof cable drive tube retainer. Carefully scrape off any remaining foam.
3. Use a clean rag and 3M(TM) General Purpose Adhesive Cleaner 08984 or equivalent, in order to remove any adhesive or residue from the
sunshade track.
Installation Procedure
1. Remove the backing paper from the sunshade stop to expose the adhesive surface.