Aura L4-2.4L (2008)
Removal Procedure
1. Apply a double layer of masking tape to the roof panel along the rear edge of the sunroof opening.
2. Cycle the sunroof window to the vent position, then to 25 mm (1 in) rearward.
3. Remove the sunroof module assembly. Refer Sunroof Module Assembly Replacement (CF5) (See: Service and Repair/Removal and Replacement
).
4. From the underside of the sunroof window track assembly, remove the 3 screws that secure the water gutter to the forward cross-member of the
track assembly.
