Aura L4-2.4L (2008)
bore sleeve.
1. Place the NEW cylinder bore sleeve onto the cylinder block.
2. Install EN 45680-851 fixture and EN 45680-853 cylinder bore sleeve installer assembly over the cylinder bore sleeve and onto the cylinder block.
Do not apply downward pressure to the cylinder bore sleeve.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
Important: Use 4 old cylinder head bolts for the attaching bolts.
3. Insert the 4 attachment bolts into the legs of the EN 45680-851 fixture (1). Do not apply downward pressure to the cylinder bore sleeve (2).
Tighten the 4 attachment bolts to 15 N.m (11 lb ft).