Aura L4-24L (2008) | Engine | Cylinder Block Assembly | Piston Specifications
5. Remove the connecting rod and the piston out of the top of the engine block using the J-43966-1.
6. Clean the cylinder bores with hot water and detergent or with a light honing.
7. Swab the bores with the engine oil and a clean, dry cloth.
Installation Procedure
1. Coat the following parts with engine oil:
*
The piston
*
The piston rings
*
The cylinder bore
*
The bearing surfaces
2. Install the piston into its original bore using the J-43966-1.