Aura L4-2.4L (2008)
7. Remove the oil level indicator tube bolt.
8. Remove the oil level indicator tube.
9. Remove the oil level indicator tube O-ring seals, if necessary.
Installation Procedure
1. Install NEW oil level indicator tube O-ring seals, if necessary.
2. Install the oil level indicator tube.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the oil level indicator tube bolt.
Tighten the bolt to 10 N.m (89 lb in).
4. Raise and support the vehicle.