Aura L4-2.4L (2008)
Important:
*
There are 3 colored links on the timing chain. Two links are of matching color, and 1 link is of a unique color. Use the following
procedure to line up the links with the actuators. Orient the chain so that the colored links are visible.
*
Always use new actuator bolts.
12. Assemble the intake camshaft actuator into the timing chain with the timing mark lined up with the uniquely colored link (1).
13. Lower the timing chain through the opening in the cylinder head. Use care to ensure that the chain goes around both sides of the cylinder block
bosses (1, 2).
14. Install the intake camshaft actuator onto the intake camshaft while aligning the dowel pin into the camshaft slot.
15. Hand tighten the new intake camshaft actuator bolt.