Aura L4-2.4L (2008)
Tighten the nuts to 100 N.m (74 lb ft).
11. Install the engine mount to bracket bolts (2).
12. Tighten the engine mount to bracket bolts in the following sequence.
1. Middle
2. Rear
3. Front
Tighten the bolts to 50 N.m (37 lb ft).
13. Remove the engine support fixture. Refer to Engine Support Fixture (See: Service and Repair/Removal and Replacement/Engine Support Fixture
).
14. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement (See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft
Pulley/Service and Repair).
15. Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement (See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt
Tensioner/Service and Repair).
