Aura L4-2.4L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the HVAC module assembly mounting bolts to the instrument panel reinforcement.
Tighten the bolts to 5 N.m (44 lb in).
4. Install the left hand side window defogger outlet duct.
5. Install the blower motor resistor wire harness connector.
6. Install the blower motor wire harness connector.
7. Install the mode actuator wire harness connector.
8. Install the air temperature actuator wire harness connector.
9. Install the recirculation actuator wire harness connector.
10. Install the I/P assembly. Refer to Instrument Panel Reinforcement Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair).
11. Install the heater hoses to the heater core. Refer to Heater Inlet Hose Replacement (LY7) (See: Heater Hose/Service and Repair/Heater Inlet Hose
Replacement)Heater Inlet Hose Replacement (LZ4) (See: Heater Hose/Service and Repair/Heater Inlet Hose Replacement)Heater Inlet Hose
Replacement (LAT Pump to Engine) ()Heater Inlet Hose Replacement (LAT Pump to Heater Core) ()Heater Inlet Hose Replacement (LE5) (
See: Heater Hose/Service and Repair/Heater Inlet Hose Replacement) and Heater Outlet Hose Replacement (LY7) (See: Heater Hose/Service and
Repair/Heater Outlet Hose Replacement)Heater Outlet Hose Replacement (LAT) (See: Heater Hose/Service and Repair/Heater Outlet Hose
Replacement)Heater Outlet Hose Replacement (LE5) (See: Heater Hose/Service and Repair/Heater Outlet Hose Replacement).
12. Install the A/C lines to the thermal expansion valve. Refer to Thermal Expansion Valve Replacement (See: Expansion Valve/Service and Repair).
