Aura L4-2.4L (2008)
Alignment: Service and Repair
Front Camber Adjustment
Front Camber Adjustment
1. Reach around the tire, using the appropriate extension and socket.
2. Loosen both strut to knuckle nuts just enough to allow for movement.
3. If the strut has not been modified previously, perform the following steps before continuing with the wheel alignment:
1. Disconnect the strut from the knuckle. Refer to Strut Assembly Replacement (See: Steering and Suspension/Suspension/Suspension Strut /
Shock Absorber/Service and Repair/Front Suspension Strut/Strut Assembly Replacement).
2. File the lower hole until the outer flange slot matches the inner flange slot.
3. Connect the strut to the knuckle. Refer to Strut Assembly Replacement (See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Front Suspension Strut/Strut Assembly Replacement).