Aura L4-2.4L (2008)
1. Lubricate the CKP sensor O-ring seal with clean engine oil.
2. Install the CKP sensor.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the CKP sensor bolt.
Tighten the sensor bolt to 10 N.m (89 lb in).
4. Connect the engine wiring harness electrical connector (1) to the CKP sensor.
5. Install the starter. Refer to Starter Motor Replacement (LAT) ()Starter Motor Replacement (LZ4) ()Starter Motor Replacement (LY7) ().
6. Perform the crankshaft position system variation learn procedure. Refer to Crankshaft Position System Variation Learn (See: ).
