Aura L4-2.4L (2008)
15. Remove the caps from the fuel rail pipe and the EVAP purge solenoid.
16. Connect the EVAP line quick connect fitting (2) to the EVAP purge solenoid. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel
Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
17. Connect the fuel feed line quick connect fitting (3) to the fuel rail. Refer to Metal Collar Quick Connect Fitting Service (See: Fuel Line
Coupler/Service and Repair/Metal Collar Quick Connect Fitting Service).
18. Install the fuel feed line retainer (1) to the fuel line bracket.
19. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair).
20. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (LAT) ()Battery Negative Cable
Disconnection and Connection (LZ4/LY7) ().
21. Tighten the fuel fill cap.
22. Inspect for leaks.
1. Turn ON the ignition, with the engine OFF for 10 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition, with the engine OFF.
4. Inspect for fuel leaks.