Aura L4-2.4L (2008)
1. Install the park brake warning lamp switch (2) to the park brake pedal assembly (1).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the park brake warning lamp switch screw (3).
Tighten the screw to 2 N.m (18 lb in).
3. Connect the electrical connector to the park brake warning lamp switch.
4. Install the closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair).
5. Check the operation of the park brake warning lamp switch.
