Aura L4-2.4L (2008)
Washer Fluid Level Switch: Service and Repair
Windshield Washer Solvent Level Switch Replacement
Removal Procedure
1. Drain the washer solvent from the washer solvent container.
2. Remove the left front fender liner. Refer to Front Fender Liner Replacement (See: Body and Frame/Fender/Front Fender/Front Fender
Liner/Service and Repair).
3. Disconnect the washer solvent container level sensor electrical connector.
4. Using a small flat-bladed tool, remove the washer solvent level sensor (4) from the washer solvent container (1).
5. Using a small flat-bladed tool, remove the level sensor seal (3) from the washer solvent container (1).
Installation Procedure