Aura L4-2.4L (2008)
4.
Disconnect the right cooling fan electrical connector. Remove the wiring harness clip from the fan shroud. Connect the engine cooling fan jumper
harness to the fan connection. Secure the jumper harness to the fan shroud (location 1) using the clip. Install a tie strap through the retainer as
shown, and install the retainer into the existing hole in the frame (location 2). Secure the harness to the retainer using the tie strap.
5.
Connect the negative battery cable.
6.
Close the vehicle hood.
Claim Information - GM and Saturn Canada Only
Claim Information -- US Saturn
Disclaimer