Aura L4-2.4L (2008)
Stabilizer Link: Service and Repair
Stabilizer Shaft Link Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Service Intervals).
2. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
3. Disconnect the stabilizer link from the stabilizer shaft.
4. Disconnect the stabilizer link from the strut assembly and remove from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
1. Connect the stabilizer link to the strut assembly.
Tighten the stabilizer link nut to 65 N.m (48 lb ft).
2. Connect the stabilizer link to the stabilizer shaft.
Tighten the stabilizer link nut to 65 N.m (48 lb ft).
3. Install the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
4. Lower the vehicle.
