Aura L4-2.4L (2008)
2. Install the 3 hub and bearing assembly bolts.
Tighten the hub and bearing assembly bolts to 115 N.m (85 lb ft).
3. Install the wheel speed sensor connector into the bracket until the locking tabs click into place.
4. Connect the electrical connector to the wheel speed sensor.
5. Install the axle nut to the wheel drive shaft, hand tighten the wheel drive shaft nut.
6. Install the brake rotor. Refer to Front Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service
and Repair/Removal and Replacement/Front Brake Rotor Replacement).
7. Install the wheel drive shaft nut to the wheel drive shaft.
8. Use a screw driver or similar tool to stop the rotation of the brake rotor.
Tighten the wheel drive shaft nut to 215 N.m (159 lb ft).
9. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
