Aura L4-2.4L (2008)
Front Lift Pads
When lifting the vehicle with a frame-contact lift, place the front lift pads on the front lower brackets, inboard of the rocker pinch weld flange and
outboard of the front frame rail, at the torque box location, as shown.
Rear Lift Pads
When lifting the vehicle with a frame-contact lift, place the rear lift pads on the rear frame rail, at the torque box location, as shown.
Vehicle Jacking
Notice: When you are jacking the vehicle at the front locations, be certain that the jack or the jack lift pad does not contact the front fascia, front fascia
air dam, or the front fenders. If such contact occurs, vehicle damage may result. When jacking at selected front locations additional clearance may be
required for the jacking points.
Important: When you are lifting a vehicle with a service jack, block the wheels at the opposite end from which you are lifting. Use jack stands
to provide additional support.
Front of Vehicle
When using a service jack under the front of the vehicle use one of the following locations:
*
Place the service jack pad in the same location as shown for the front lift pads.
*
Under the front frame crossmember, as shown.
Rear of Vehicle
Important: Place jackstands ONLY under strong and stable vehicle structures.
When using a service jack under the rear of the vehicle place the jack pad on the rocker panel flange, at the torque box location, as shown.
