Aura L4-2.4L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
1. Install the NEW stud into the bearing/hub assembly.
Add enough washers (1) in order to draw the stud into the hub.
2. Install and tighten a wheel nut (2) until the head of the wheel stud is fully seated against the back of the bearing hub flange.
3. Remove the wheel nut (2) and the washers (1).
4. Install the brake rotor, and install the brake caliper and bracket as an assembly. Refer to Front Brake Rotor Replacement (See: Brakes and
Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Front Brake Rotor Replacement).
5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Service and Repair).
6. Lower the vehicle.
