Aura L4-2.4L (2008)
1. Coat the new cooler line seal with transmission fluid.
2. Using the J 41239, install the new cooler line seal.
3. Install the transaxle oil cooler line assembly to the transaxle.
4. Install the transaxle oil cooler line assembly nut.
Tighten the oil cooler line assembly nut to 7 N.m (62 lb in).
5. Lower the vehicle.
6. Add fluid to the transaxle. Refer to Automatic Transmission Fluid Filter and Seal Replacement (See: Fluid Filter - A/T/Service and Repair).
7. Start the engine and check for leaks.
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Removal Procedure