Aura L4-2.4L (2008)
4. Install the transmission mount to transmission bolts.
Tighten the bolts to 90 N.m (66 lb ft).
5. Install the transmission mount to bracket through bolt.
Tighten the bolt to 90 N.m (66 lb ft).
6. Remove the jack stand.
7. Install the left tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
8. Lower the vehicle.
Transmission Rear Mount Replacement (Second Design)
Transmission Rear Mount Replacement (Second Design)
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Service Intervals).
2. Remove the left tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
3. Using a suitable jack stand, support the rear of the powertrain.
