Aura L4-2.4L (2008)
1. Remove the transaxle case side cover. Refer to Control Valve Body Cover Replacement (See: Control Valve Body Cover Replacement).
2. Remove the oil pump bolts and the oil pump assembly.
3. Remove the oil pump shaft.
4. Disconnect the wire harness connectors from the following components:
*
Pressure control solenoid
*
1-2, 2-3 shift solenoids
*
TFP switch assembly
*
TCC solenoid
5. Remove the TFP switch assembly bolts and remove the switch assembly from the control valve body. The 7 TFP switch O-rings are reusable if not
