Aura L4-2.4L (2008)
7. Connect the control valve body TCM electrical connector (1).
8. Install the wire harness retainer (2) to the control valve body cover stud.
Tighten the nut to 12 N.m (106 lb in).
9. Install the lower nuts to the left transmission mount. Refer to Transmission Mount Replacement - Left Side (See: Transmission Mount/Service and
Repair/6T70/6T75 - Automatic Transmission/Transmission Mount Replacement - Left Side).
10. Install the front transmission mount. Refer to Transmission Front Mount Replacement (See: Transmission Mount/Service and Repair/6T70/6T75 -
Automatic Transmission/Transmission Front Mount Replacement).
11. Install the front air dam. Refer to Front Air Dam Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service and Repair
).
12. Install the left front fender liner. Refer to Front Fender Liner Replacement (See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service
and Repair).
13. Install the left engine splash shield. Refer to Engine Splash Shield Replacement - Left Side (LY7, LZ4) ()Engine Splash Shield Replacement -
Left Side (LAT) ().
14. Lower the vehicle.
