Aura L4-2.4L Hybrid (2009)
4. Remove the timing chain retention tool (1) from the intake side of the timing chain.
5. Reset and install the timing chain tensioner. Refer to Timing Chain Tensioner Replacement (See: Timing Components/Timing Chain
Tensioner/Service and Repair)
6. Install the camshaft actuator retainer (1).
7. Install the camshaft actuator retainer bolts and tighten to 10 Nm (89 lb in).
8. Tighten the NEW camshaft actuator bolt to 85 Nm (63 lb ft) plus an additional 30 degrees using the J 45059 .
Note: You must have the EN-48953 installed to perform this procedure.
9. Release the tensioner by rotating the crankshaft balancer counterclockwise then tighten the bolt to 45 Nm (33 lb ft)..
10. Remove the camshaft actuator retainer EN-48953 (1).