saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Sunroof Window Alignment|Page 16927 > < Sunroof Window Height and Opening Fit Adjustment (CF5)|Page 16924
Page 1
background image

Sunroof / Moonroof Panel: Service and Repair
Sunroof Window Alignment

Sunroof Window Alignment

Adjustment Procedure

1.  Close the sunroof window panels.

Important:   Wind/whistle noise, air leaks and possible water leaks on the C3Y panoramic sunroof when closed. The easiest way to
identify the location of the air leak is to use a rubber hose against your ear in order to listen for the air leak. Using a rubber hose, 1/2 inch
diameter 3 feet long, listen around all the sealing locations while all the door, windows and the sunroof window panels are closed, with the
HVAC blower on high. It should be noted that some leakage will be heard at the "T" joints (1) on vehicles without a customer complaint.

2.  One or more window panels may need to be adjusted because of being too far rearward.

*  This will lead to one or both of the rear corners touching the small stop, refer to the point located (1) on each front corner of the sunroof

window panels.

*  This will cause the sunroof window panel to lift away from the seal, creating a leak at the "T" joint locations.

Sunroof Window Alignment|Page 16927 > < Sunroof Window Height and Opening Fit Adjustment (CF5)|Page 16924