Aura V6-3.5L (2007)
4. Lift the sunroof window (2 or 3) from the sunroof opening.
5. Remove the actuator cover from the sunroof.
Installation Procedure
1. Position the sunroof window (2 or 3) into the opening.
Important: Do NOT tighten the sunroof window actuator screws all way down before inspecting the alignment of the sunroof window.
Maintain a 4.00 mm (0.16 inch) gap clearance around the sunroof window edges.
2. From inside the vehicle, install the sunroof window actuator screws to the left and right sides. Do Not tighten the screws fully
3. Adjust the sunroof window panel. Refer to Sunroof Window Height and Opening Fit Adjustment (C3Y) Sunroof Window Height and Opening Fit
Adjustment (CF5) or Sunroof Window Alignment. See: Adjustments See: Adjustments
Notice: Refer to Fastener Notice.