Aura V6-3.5L (2007)
Sunroof / Moonroof Track: Service and Repair
Sunroof Track Timing/Synchronization
Removal Procedure
1. Place the module in the full open position.
2. Remove the headliner.
3. Disconnect the electrical connector from the motor/actuator.
4. Remove the motor.
5. Push the window guides rearward on the track until the guides are positioned against the rear hard stop.
Installation Procedure
1. Install the motor.
2. Connect the electrical connector to the motor/actuator.
3. Install the headliner.
4. Perform the Initialization/Teach Procedure. Refer to Sunroof Motor/Actuator Initialization/Teach Process (Existing Motor) Sunroof
Motor/Actuator Initialization/Teach Process (New Motor) Sunroof Motor/Actuator Initialization/Teach Process (Panoramic).
5. Verify the operation of the sunroof.