saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Sunroof Window Seal Pucker Repair|Page 17470 > < Sunroof Window Seal Pucker Repair|Page 17468
Page 1
background image

Sunroof / Moonroof Weatherstrip: Service and Repair
Sunroof Window Seal Roll Repair

Sunroof Window Seal Roll Repair

Adjustment Procedure

1.  Close the sunroof window panels.

Important:  Wind/whistle noise, air leaks and possible water leaks on the C3Y panoramic sunroof when closed. The easiest way to identify
the location of the air leak is to use a rubber hose against your ear in order to listen for the air leak. Using a rubber hose, 1/2 inch
diameter 3 feet long, listen around all the sunroof window sealing locations while all the door, windows and the sunroof window panels
are closed, with the HVAC blower on high. It should be note that some leakage will be heard at the "T" (1) joints on vehicles without a
customer complaint.

Important:  If the sunroof window seal was rolled over during the installation causing inadequate sealing against the sunroof window
opening. This condition can be corrected by "fluffing" the seal.

2.  Inspect the sunroof window seal for being rolled (1) over in area.
3.  Inspect the sunroof window seal for the incorrect conditions below:

Sunroof Window Seal Pucker Repair|Page 17470 > < Sunroof Window Seal Pucker Repair|Page 17468