Aura V6-3.5L (2007)
3. Dry the reservoir with non-lubricated, filtered air.
4. Lubricate the new seals and the reservoir bayonets with new Delco Supreme 11(R), GM P/N 12377967 (Canadian P/N 992667) or equivalent
DOT-3 brake fluid.
5. Install the seals, making sure they are fully seated.
6. Install the reservoir onto the master cylinder by pressing straight down by hand until pin holes are aligned.
7. Carefully tap in the reservoir retaining pins to secure the reservoir.
8. Fill the master cylinder reservoir.
9. Install the brake fluid level sensor.
10. Remove the master cylinder from the vise.
11. Install the master cylinder to the vehicle.
Master Cylinder Replacement
Master Cylinder Replacement
Caution: Refer to Brake Fluid Irritant Caution.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice.
Removal Procedure
1. Without disconnecting the hoses, position the radiator surge tank aside. Refer to Radiator Surge Tank Replacement.
