Aura V6-3.5L (2007)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator and Tube Replacement
Removal Procedure
1. Remove the spark plug wire from the number 6 cylinder spark plug.
2. Remove the heated oxygen sensor electrical connector (HO2S) (3) clip from the indicator tube tab.
3. Remove the oil level indicator.
4. Remove the oil level indicator tube bracket bolt.
5. Remove the oil level indicator tube.
6. Inspect the oil level indicator tube O-ring seal for damage, replace as necessary.
Installation Procedure