Aura V6-3.5L (2007)
1. Install the engine front cover gasket.
2. Install the engine front cover.
3. Apply sealant to the bolts in the locations pointed out (1) in the graphic. Refer to Sealers, Adhesives, and Lubricants.
Notice: Refer to Fastener Notice.
4. Install the engine front cover bolts.
Tighten the bolts to 25 N.m (18 lb ft).
5. Install the water pump.
6. Install the thermostat housing.
7. Install the crankshaft position actuator magnet.
8. Install the crankshaft balancer.
9. Install the oil pan.
11. Fill the cooling system.