Aura V6-3.5L (2007)
8. Remove the power steering gear inlet hose bolt (1) and disconnect the power steering gear inlet hose (2) and the power steering gear outlet hose
(4) from the steering gear (3).
9. Remove the power steering gear outlet hose from the vehicle.
10. Extract the steering gear oil seals (1) from the steering gear using remover/installer J 44586 (2) with the aid of a flat-bladed tool (3) for additional
leverage.
Installation Procedure
Important: Start all of the nuts and bolts by hand before finalizing any of the torques.
