Aura V6-3.5L (2007)
Use a punch to reposition the corner of the seat frame crossmember downward (1) so that the seat wiring harness cannot come in contact with the corner.
Repair the seat wiring harness as necessary. Refer to the Wiring Repairs section of SI for more information.
Before installing the seat cushion outer trim panel, make sure the wiring harness is routed above the shelf on the panel (2). The seat wiring harness
retainers (1) must be fully seated in the seat cushion side trim panel so that the wiring harness is properly positioned in the seat.
Carefully install the seat cushion side trim panel so that proper positioning of the seat wiring harness is maintained after the trim panel is installed.
Check the operation of the power seat adjuster.
Warranty Information
For vehicles repaired under warranty, use the table.
