Aura V6-3.5L (2007)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission Hoses/Pipes Replacement - Engine/Chassis
Removal Procedure
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH 48027-100) Fuel Pressure Relief (Without CH 48027-100)
2. Remove the intake manifold cover.
3. Disconnect the fuel feed pipe quick connect fitting (3) from the fuel rail.
4. Disconnect the EVAP pipe quick connect fitting (2) from the EVAP purge solenoid.
5. Cap the fuel rail pipe and the EVAP purge solenoid in order to prevent possible fuel and/or EVAP system contamination.
6. Remove the brake, fuel, and EVAP pipe clips (1, 2) from the studs on the front of dash.
7. Remove the brake pipes from the clips.
8. Raise and support the vehicle. Refer to Vehicle Lifting.
