Aura V6-3.5L (2007)
Fuel Rail: Service and Repair
Fuel Injection Fuel Rail Assembly Replacement
Removal Procedure
Caution: In order to reduce the risk of fire and personal injury that may result from a fuel leak, always install the fuel injector O-rings in the
proper position. If the upper and lower O-rings are different colors (black and brown), be sure to install the black O-ring in the upper position
and the brown O-ring in the lower position on the fuel injector. The O-rings are the same size but are made of different materials.
Notice: Cap the fittings and plug the holes when servicing the fuel system in order to prevent dirt and other contaminants from entering the open pipes
and passages.
An 8-digit identification number is stamped on the fuel rail. Refer to this number if servicing or part replacement is required.
1. Disconnect the fuel feed pipe quick connect fitting from the fuel rail.
2. Remove the upper intake manifold.
