Aura V6-3.5L (2007)
Notice: Refer to Fastener Notice.
4. Connect the power steering gear inlet hose (2) and power steering gear outlet hose (4) to the steering gear (3) and install the power steering gear
inlet hose bolt (1). Prior to tightening the power steering gear inlet hose bolt (1), rotate the power steering gear outlet hose (4)
clockwise/downwards so it touches the power steering gear inlet hose (2). Verify the power steering hoses are still touching after the power
steering gear inlet hose bolt is tight.
Tighten the bolt to 27 N.m (20 lb ft).
5. Install the 2 power steering gear outlet hose retainers to the front of the front frame.
