Aura V6-3.5L (2007)
19. Remove the front frame bolts (1).
20. Remove the rear frame bolts (4).
21. Remove the frame reinforcements (3).
22. Raise the vehicle off of the frame.
23. Remove the following components if replacing the frame:
*
The lower control arms-Refer to Lower Control Arm Replacement.
*
The stabilizer shaft-Refer to Stabilizer Shaft Replacement.
Installation Procedure
1. Install the following components on the suspension crossmember if removed:
*
The stabilizer shaft-Refer to Stabilizer Shaft Replacement.
*
The lower control arms-Refer to Lower Control Arm Replacement.
2. Lower the vehicle on to the frame.
3. Install the frame reinforcements (3).