saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

4T45-E - Automatic Transaxle|Page 11417 > < 4T45-E - Automatic Transaxle|Page 11415
Page 5
background image

5. Install the transmission mount to bracket through bolt and nut.

Tighten the bolt and nut to 90 N.m (66 lb ft).

6. Remove the jack stand. 
7. Install the left tire and wheel. 
8. Lower the vehicle.

Transmission Mount Replacement - Left Side (Sedan / Coupe)

Transmission Mount Replacement - Left Side (Sedan / Coupe)

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the left front tire and wheel. 
3. Remove the left splash shield. Refer to Radiator Air Lower Baffle and Deflector Replacement.
4. Using a suitable floor jack and block of wood, support the powertrain.

5. Remove the transaxle mount lower nuts from the frame.

4T45-E - Automatic Transaxle|Page 11417 > < 4T45-E - Automatic Transaxle|Page 11415